Ion Stroescu was born in Ploiești on 13 August 1888. He studied primary and high school in Ploiești, then he became a sports teacher at the Central School of Gymnastics in Bucharest. Very early in his youth he became addicted to aviation, especially for aerodynamics. In 1910 he founded an association of aeronautical constructions, where the photo below was taken:

Ion Stroescu, Nicolae Tănase, Coreneliu Marinescu and Tache Brumărescu at 1910, in the new association for promoting the aeronautical constructions (photo: Dan Antoniu).

In 1925 he published an important book on aerodynamics, New Perspectives in Airplane Aerodynamics. The book was handwritten, and reproduced by lithography. In 2013, INCAS published it in facsimile and thus it has been preserved. The depth of the analysis of the physical phenomena indicate a fascinating intuition for aerodynamics.

In the same year, he applies for two valuable patents, for controlling the boundary layer by injection-suction and blowing-out (patents 11.169/1925 and 13.677/1925 Ion Stroescu).

 

He built his first wind tunnel in 1927 at Râmnicu Sărat, in the sports room of the high school he was teaching.

 

Illustrations show the blue prints of the Wind Tunnel in Râmnicu Sărat and photos during construction.

 

The new Wind Tunnel attracted Prof. Elie Carafoli’s attention, the well known Romanian aerodynamics expert, the founder of the aeronautical engineering school. He tried to stop the demolition of the tunnel, ordered by the Ministry because it ”abusively” occupied the sports room. He did not managed that, but managed instead to get an order for Ion Stroescu to be assigned at the Politechnical School.

In 1929 Carafoli appointed Stroescu as assistant professor at the Department of Aerodyanmics. Under his supervision, Ion Stroescu designed and managed the works for the new Wind Tunnel of Polizu.

In the experimental section of the tunnel, the models of all Romanian airplanes were to be tested. The room was equipped with an aerodynamic strain cage, another invention, which demonstrate the creativity of the Romanian pioneers of aerodynamics.

 

On 7 May 1931, King Carol the 2nd, together with Prince Nicolae, with Prime Minister Nicolae Iorga and with the Rector of the Politechnical School, Nicolae Vasilescu-Karpen inaugurate the most important Wind Tunnel in South-East Europe, and one of the most advanced and well equipped in Europe at the time.

We may easily recognize the ”Grand Amphitheatre of the School”, currently known as the F024 Acad. Virgiliu N. Constantinescu Amphitheatre of the Faculty of Aerospace Engineering. The Wind Tunnel in Polizu contributed to the relative superiority of the Romanian aeronautical industry before and during WWII. Hundreds of new aircraft designs, wing airfoils and other parts could be tested. Some of the aircraft designed in this Wind Tunnel were matching the performance at the highest standards worldwide, competing with American, British or German aircraft.

In 1937 Ion Stroescu got another assignment, with the Faculty of Sciences of the University of Bucharest, by the Laboratory of Prof. Victor Vâlcovici, who was PhD in aerodynamics from the school of the well known scientist Ludwig Prandtl (1931).

Ludwig Prandtl visited the Politechnical School in 1941, particularly to see the Wind Tunnel in Polizu. In the picture, from left to right: C.C. Teodorescu, Elie Carafoli, Ludwig Prandtl, Dionisie Germani, Victor Vâlcovici, Lucius Saveanu, Ion Cârstoiu and Nicolae Tipei.

On the stairs of the tunnel, in this photo there are C. C. Teodorescu, Ludwig Prandtl and Dionisie Germani.

The experimental results at the end of an intense effort under the supervision of Prof. Vâlcovici, and later (after 1941) with the participation of the young mathematician Ion Șabac, the Wind Tunnel in Polizu and its creator Stroescu get an international recognition.

In 1943, Ion Stroescu’s presentation at the Research Academy in Berlin attracted appreciative remarks by Professors Ludwig Prandtl and A. Betz.

In 1946 at the Fourth Congress of Applied Mechanics, Ion Stroescu presents at Sorbone the paper “A New Type of Wind Tunnel”.

Prof. Edmond Brun requested permission to use the blue prints of the Bucharest Wind Tunnel to build a similar one at Sorbone” (Prof. V. Vâlcovici).

Ion Stroescu stayed in France for 14 months, where he designed a special icing wind tunnel at Bellevue (ONERA).

  

Wind Tunnel ONERA of Bellevue, France, designed by Ion Stroescu

In 1948, Ion Stroescu returned to Romania and worked at the Institute of Applied Mechanics of the Academy. In this capacity, he designs and builds the subsonic wind tunnel of the Militari Platform (INCAS).

In 1960, Ion Stroescu was celebrated for the 70th anniversary and for 50 years of activity in aeronautics, at the Romanian Academy, by Acad. Elie Carafoli, Acad. Victor Vâlcovici, Acad. Dumitru Dumitrescu and Prof. Nicolae Tipei. On the occasion, he was recognized as an inventor and pioneer in experimental aerodynamics, as the leader of the Romanian aerodynamics.

Ion Stroescu died in 1961.

(This article was adapted after the presentations of Prof. Sterian Dănăilă, using original materials of the ”Elie Carafoli” Department of Aerospace Sciences, and using the paper of Conf. Nicolae Șerban Tomescu, ”An important achievement of Professor Ion Stroescu: the wind tunnel of the Polytechnic School of Bucharest” published in 2011 in the INCAS Bulletin. Another reference is the paper of Buiu V,  Ion Stroescu (1888-1961) A Man and a Life –for a passion, INCAS BULLETIN, Volume 3, Special Issue/ 2011, pp. 1 – 15. A significant reference over the entire field is the book ”The History of the Higher Education in Aviation” by Prof. Virgil Stanciu)

 

 

0 Comments

Innovative Teachers – Entrepreneurs Students

Information regarding the candidate registration process, timing, the eligibility criteria of the candidates, the evaluation of the candidates and the necessary documents for the registration of the candidates for the TARGET GROUP (TG) - STUDENTS within the project...

Dr. Marius Ioan Piso DHC

Based on the proposal of the Faculty of Aerospace Engineering, the Senate of the University Politehnica of Bucharest awards the title of Doctor Honoris Causa to the President of the Romanian Space Agency, Dr. Marius Ioan Piso. The ceremony will take place in the...

Lessons from the Boeing 737 MAX Crisis

In the Boeing 737 MAX crisis we have extensive coverage from many affected stakeholders except the aeronautical engineers, who actually hold responsibility of every factor significant in the loss of 346 lives in the Lion Air 610 and Ethiopian 302 accidents: Design of...

Flight Training 2019

  Since its beginning, the Faculty of Aerospace Engineering organized a long awaited event for the students: the flight training at the end of the second year of study. This tradition was discontinued in the late 90’s, only to be brought back recently with the...

Romanian Aviation Academy Hires Aviation Engineers

  Romanian Civil Aviation Academy (SSAvC) hires two aviation engineers. Details <here>. UPB Faculty of Aerospace Engineering signed in 2016 a strategic partnership with the Aviation Academy materialized in students internship, aircraft maintenance, pilots...

Office Special Summer Program

Faculty and Dean's Office of the Faculty of Aerospace Engineering are open according to a special schedule in the summer time as follows: every Wednesday 10 am - 1 pm. The office is open on Wednesday 24 July and Thursday 25 July 8 am - 6 pm, but is closed on Friday 26...

3DEXPERIENCE: The New French Revolution

  Today we celebrate France and we remember the French Revolution, which reshaped the history of Europe and of the mankind. Less would we expect a New French Revolution, infinitely more peaceful, to reshape the history of Europe and of the mankind starting from...

Dassault Aviation Prize 2019 was awarded to a UPB-FAE team!

  On 6 June 2019 at the Air and Space Museum of Paris Le Bourget, the students of the Faculty of Aerospace Engineering gathered in the ASAIA team have won the prestigious Dassault Aviation Prize, awarded by the European Astronautic Club, with support from Airbus,...

Tarom hires aviation engineers

  Courtesy of our Alumna Diana Liță, aerospace engineer working for Tarom in the Structural and Advanced Composite Repair Shop, here you find a hiring ad from Tarom regarding aeronautical engineers. We wholeheartedly recommend Tarom, a long standing partner of...